Wireless Flash Trigger - PT04tm V2s (for 580EX / SB900 ) Model: 22071   In stock   SGD55.00 SGD40.00

4 Channels Hotshoe Radio Trigger for Camera (V2s)
- Turn your existing camera flash into a studio flash
- Maximum distance of transmitter and receiver: up to 30m unblock
- All flash fixed onto this product will be at manual mode, i.e. NO TTL ETTL
- Specifically for Nikon SB-900, Canon 580EX, 580EX II, 430EX, 430EX II, and Olympus FL-36, it's also compatible with most other flash like Canon 550EX, 540EZ, 520EZ, 430EZ, 420EX, 420EZ, 380EX, Nikon SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, Olympus FL-50, FL-40, FL-36, Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT, Sigma EF-500 DG Super (on slave mode), EF-500 DG ST (nikon only) , EF-430, Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D

NOT compatible with Sigma EF-500 DG ST (Canon), and all Nissin flash

This product includes:
1x Transmitter (to mount on camera)
1x Receiver (to mount on flash)
1x sync cable (for connecting the transmitter to the camera)


The batteries are available in almost all departmental store
Receiver - 2x AAA (not included in this package)
Transmitter - 23A (included in this package)

Channel selection: The channel selection is meant for anti-interference. That is, if there's someone near you uses the same device, there'll be chances that each of you may be triggering each others' flash. The solution is to set your device to a different channel from the other person. E.g. you use channel 1 and the other person use channel 2.

The 4 channels selections (DIP Switch in both receiver & transmitter) are:
1) Switch 1 - On, Switch 2 - On
2) Switch 1 - On, Switch 2 - Off
3) Switch 1 - Off, Switch 2 - On
4) Switch 1 - Off, Switch 2 - Off


Normally you can set to any channels if there's no one around using the same device at the same time. Both receiver & transmitter have to be at the same channel to work.

Image below is our older version of PT04tm for demo only. Note the receiver in the picture below is not compatible with this current package. However the receiver of this current package is compatible with 1 channel in the earlier RF-04tm transmitter (if you've bought it from us).

Troubleshooting tips:
All product has been tested before sending, before contacting us for support please check the following:
1) make sure the transmitter and receiver are at the same channels
2) press the test button on the transmitter and see if the receiver light up
3) remove the battery on the receiver, re-install battery but do not cover it up. Press the transmitter and see if the receiver light up. It could be due to poor receiver battery contact

Recommended matching products:
1) Light stand
2) Flash holder
3) Umbrellas
4) Wireless flash trigger